Please ensure Javascript is enabled for purposes of website accessibility

Replacing the Screen on an HP Envy Laptop in NYC

Replacing the screen on an HP Envy laptop involves several steps. It’s important to note that laptop disassembly can be complex and may void your warranty if not done correctly. If you’re not comfortable with the process, it’s recommended to seek professional help. If you’re confident in your technical skills, here’s a general guide on how to replace the screen on an HP Envy laptop:

Tools you might need:

  • Screwdrivers (Philips and Torx)
  • Plastic opening tools or spudger
  • Replacement screen
  • Anti-static wrist strap (recommended)
  • Clean, lint-free cloth
  • Patience and careful attention to detail


  1. Prepare the Workspace:
    • Work in a clean, well-lit area.
    • Shut down the laptop and disconnect all cables.
    • Wear an anti-static wrist strap to prevent static discharge.
  2. Remove the Battery:
    • If your laptop has a removable battery, remove it to prevent accidental power-on.
  3. Remove the Bezel:
    • Gently pry off the plastic bezel around the screen using a plastic opening tool or spudger. Start at one corner and carefully work your way around.
    • Be cautious not to apply too much force as you might damage the bezel or the screen.
  4. Disconnect Cables:
    • Once the bezel is removed, you’ll see the screen and the cables connected to it.
    • Carefully disconnect the display cable and any other connectors that are holding the screen in place.
  5. Remove the Screen:
    • Most laptop screens are held in place by screws. Locate these screws (often hidden under rubber covers or labels) and carefully remove them.
    • Gently lift the screen assembly out of the laptop’s chassis.
  6. Install the New Screen:
    • Place the new screen assembly in the laptop’s chassis.
    • Reattach the screws that hold the screen in place.
  7. Reconnect Cables:
    • Carefully reconnect the display cable and any other connectors you previously disconnected.
  8. Attach the Bezel:
    • Carefully snap the plastic bezel back onto the laptop’s front frame. Start at one corner and work your way around.
    • Make sure it’s securely attached without any gaps.
  9. Replace the Battery:
    • If you removed the battery, reinsert it.
  10. Power On and Test:
    • Reconnect all cables and power on the laptop to test the new screen.
    • Check for any abnormalities like dead pixels, flickering, or incorrect colors.
  11. Secure the Screws:
    • Once you’re confident that the new screen is functioning properly, securely tighten all the screws on the laptop.

Remember that laptop models can vary, so it’s crucial to consult your laptop’s manual or find a specific guide for your HP Envy model before attempting the screen replacement. If the laptop is under warranty, consider contacting HP support or an authorized service center for assistance to avoid voiding the warranty.

Protect your computer from potential threats! Hardware insurance plans starting from $15/month

Need protection from cyber threats? Signup to our Cyber Insurance plans starting from $25/month

Got any further questions? Walk in for a free diagnostic in NYC:

53 East 34th Street (Park & Madison), Floor 3 New York, NY 10016

806 Lexington Ave (62nd Street), Floor 3, New York, NY 10065

110 Greene Street Suite 1111, (Floor 11), New York, NY 10012

Outside NYC? Just mail in your device if in the US.